Hardware¶
My homelab consists of a variety of hardware equipment between networking and computing power that powers all the applications needed to be run inside it:
| Device | OS Disk Size | Data Disk Size | Ram | Operating System | Name | Purpose | DHCP-Assign IP Address |
|---|---|---|---|---|---|---|---|
| Raspberry Pi 4 | 64GB microSD | 1TB HDD USB & 6TB WD Elements | 4GB |  |
backup-server | NGINX Reverse Proxy, NFS Storage, Syncthing, Mini-NAS | 10.0.1.11 |
| Raspberry Pi 4 | 64GB microSD | N/A | 4GB | |
octoprint | Decomissioned ATM | - |
| Asus N550J i7-4700HQ | Samsung SSD 750 Evo 250gb | 1TB Hitachi SATA HDD | 16GB |  |
odin | Proxmox / VM's with Kubernetes | 10.0.1.7 |
| Dell Optiplex 3040 | 250GB SSD Apacer AS350 | Sandisk 250GB NVMe & 8TB WD Elements | 16GB | |
loki | Proxmox / VM's with Kubernetes | 10.0.1.8 |
| Odroid H2+ | 128GB Gigabyte NVME | 4 TB WD MyPassport | 16GB | |
freya | Proxmox / VM's with Kubernetes | 10.0.1.9 |
| Dell Optiplex 3040 | 250GB SSD Apacer AS350 | Sandisk 1TB NVMe | 16GB | |
thor | Proxmox / VM's with Kubernetes | 10.0.1.10 |
| TrueNas Scale Box | Samsung 850 250GB SSD | 6 TB WD Red Plus x2 ZFS Pool | 32GB |  |
truenas | NAS / truenas Kubernetes Cluster / Mass Storage | 10.0.1.6 |
| USG 3P | N/A | N/A | 4GB |  |
USG - Office | Router | 10.0.1.1 |
| Unifi AP 6 Lite | N/A | N/A | N/A | |
AP - Office | Access Point for my Home office | - |
| Unifi AP AC-LR | N/A | N/A | N/A | |
AP - Living Room | Access Point for my Living Room | - |
| Unifi AP 6 Lite | N/A | N/A | N/A | |
AP - Garage | Access Point for my Garage IoT Devices Office | - |
| Unifi AP 6 Lite | N/A | N/A | N/A | |
AP - Attic | Access Point for my Attic / Upstairs Bedrooms | - |
Most of this stuff is placed in the garage on an old IKEA TV stand that I had in my previous home. The cabinets are filled with cables and other misc. hardware and I have a screen that I plug on every computer there. Should probably think about getting a PiKVM or similar setup. I prefer to have everything on the garage because it's the coldest room in the house and I avoid having to deal with the noises.
TrueNas Scale Box¶
- Motherboard: Supermicro X10SLL-F
- Processor: Intel Xeon CPU E3-1230 v3 @ 3.30GHz
- Memory: 32 GB ECC RAM
- Boot Disk: Samsung 850 250GB SSD SATA (nvme not supported for boot)
- Storage: 6 TB WD Red Plus x2 ZFS Pool
- Case: MarsGaming MC-S1
- Power Supply: Aerocool VX 550
- PCI-Express Raid Controller: Dell Perc H310
Power Consumption: ~30-60W
The setup is a bit messy, case didn't fit the disks inside so they are outside, I plan to 3D print some case to put them on, but in the meantime they are on top of some cardboard boxes to keep vibration to a minimum.